Open the Add Device “+” menu on the upper right-hand corner and select the ‘Zink’ setup method. If you do not have a Beam already, select the ‘Normal’ setup option. 4) Connect to your phone to your WiFi device’s wireless signal. Your will be prompted to connect to your device’s WiFi signal.
How do I fix my Zmodo offline?
How to get zmodo camera back online
- The camera battery may be low, so the camera is required to be charged.
- Check if the internet is working properly.
- Setup the camera with the Wi-Fi again.
- Next, check the settings of your router.
- Off light beamforming feature of your router.
Why won’t my Zmodo camera connect?
Check to make sure your Wi-Fi is up and running. Check other devices connected to your Wi-Fi, such as computers or smartphones, and make sure they are still connected to the Wi-Fi and that the internet is working. Your Wi-Fi must have a good signal for it to connect to your Zmodo camera.
How do I get my Zmodo camera back online?
How to solve the Zmodo Wifi connection problem
- Access your wireless router settings;
- Look for the wireless settings menu;
- Find the wireless signal name (SSID);
- Rename the SSID for the 2.4Ghz and 5Ghz (use different names);
- Open the security tab and make sure your router is using WPA or WPA2;
How do I reset my Zmodo camera?
On some cameras like the Pivot, you can reset the Zmodo device by pressing and holding the Touch Pad for 5-10 seconds. Once the camera has successfully reset, it will reboot and the status indicator will blink green.
Why do Zmodo cameras go offline?
Usually, this problem would be generated due to a Wi-Fi signal interruption on this particular camera. There might be a conflict with the Wi-Fi IP Address assigned to that camera, or simply that the router has stopped detecting it. Take note of which IP Address is the one that is showing offline in the camera list.
Why does my security camera keep going offline?
Security cameras go offline for three main reasons: power outages, loss of internet, or failure of the camera’s components (broken parts or wires).
How do I connect my Zmodo WiFi extender?
Follow the on-screen instruction and select “Tap here to begin setup” to go to the WiFi settings page on your smartphone. Log in and select the Add Device option in the upper right corner. Select the “Tap here to add a Beam” option to connect your Beam. Your Beam will be added to your Zmodo account.
Can’t connect to Zmd_sap?
Try the steps below to resolve the issue. – Go back to the WiFi settings, verify you are still connected to the ZMD_SAP network. – In the phone’s settings, temporarily turn off mobile data until the setup is complete. – Reboot the phone.
Why wont my surveillance camera connect to WiFi?
If there is a bad reach, the IP camera can’t find your WiFi signal, and it cannot connect to the WiFi. The IP camera should not be too far from the router. Check the distance between the IP camera and the router. Login the security camera software and head to the WiFi Settings.
Why does my IP camera lost connection?
If your IP camera is wireless, it is probably too far away from your Wi-Fi router. If at all possible, move the camera closer to the router or move the router closer to the camera. If this is not an option, make sure your camera is using the 2.4 GHz network, which has better range.