How to reset hikvision ip camera

How do I factory reset my Hikvision IP camera?

How to reset a Hikvision camera (back to factory defaults)

  1. Disconnect the camera power supply;
  2. Press and hold the reset button;
  3. Connect the camera power supply;
  4. Keep holding the reset button for 15 seconds;
  5. Release the reset button.

How can I reset my Hikvision IP camera password?

HIKVISION technical support team will return key which consists of number and letter (8 bytes) or forward your request to local distributor. Input the key, type in the new password and confirm. Click Confirm and your password will be reset.

How do I reset my IP camera?

Press and hold the Reset button (SW1) on the board with your finger while reconnecting the power. Keep the Reset button (SW1) pressed for about 2 seconds. Release the Reset button (SW1). The network camera resets to factory defaults and restarts after completing the factory reset.

How can I reset my Hikvision camera without password?

Connect the device to local network and run SADP software to search online devices. Once it has been discovered, select the device and click “Forget Password”. It will pop-up a dialog, you need to enter security code to restore default password. After input security code, hit “confirm” to restore password.

What is IP camera activation password?

In earlier versions of the firmware (to version 5.3. 0) IP cameras HIKVISION supplied to IP address 192.0. 0.64 and the default password is 12345. Starting with version 5.3. … 0 and above before connecting to the network need to “activate” because they come from the factory without password (not active).

You might be interested:  How do i connect my android phone to a wireless camera

What is Hikvision IP camera default password?

Grandstream: admin/admin. Hanwha: admin/no default password, must be created during initial setup. Hikvision: Firmware 5.3. 0 and up requires unique password creation; previously admin/12345.

How do I unlock my HIKVision IP camera?

Too many times of password failure cause the user name to be locked. Reset the device. Or wait for 30 minutes. If the IP is locked, you can use another laptop with a different IP address and go to remote configuration -> system -> login security to unlock the locked IP.

How do I change my IP camera password?

To change the password on an IP camera:

  1. Log into the camera using Internet Explorer or Firefox web browsers with the current administrator password. …
  2. After logging into the camera, go to the Configuration tab. …
  3. Choose the desired user and click on the Modify button. …
  4. Enter the new password.

How do I reset my IP camera password?

If you forget the password, the only way is to reset the IP Camera to factory default setting via hardware reset button. To reset the IP Camera via the hardware reset button, please press and hold the reset button for more than 10 seconds and then all the settings will go to the default settings.

How do I reset my WiFi camera?

Factory reset your Insteon Wi-Fi Camera

  1. Connect your camera to your router using an ethernet cable.
  2. Ensure your camera is connected to power.
  3. Use a straightened paperclip to press and hold the recessed reset button for 10 seconds.
You might be interested:  How to set up momentum camera

Why does my IP camera lost connection?

If your IP camera is wireless, it is probably too far away from your Wi-Fi router. … If this is not an option, make sure your camera is using the 2.4 GHz network, which has better range. If this fixes the connection problems, you need to improve the strength of the Wi-Fi at your camera’s loaciton.

Why is my IP camera offline?

And another thing that would cause ”IP camera keeps going offline”, ”P2P failed to connect”, or ”can’t setup offline camera” is your router firewall. Some routers would block security camera connections if the firewall is on.

How can I break my DVR admin password?

To reset password of your CCTV DVR press and hold the ENTER button for 15 to 30 second until the DVR restart’s. After the restart you DVR default wizard will come up the same way like if you are setting up the DVR for the first time.

Leave a Reply

Your email address will not be published. Required fields are marked *