Sync the camera to the base station: If you are using an Arlo base station, press the Sync button on the side of the base station for about two seconds and then release the button. Note: If you press the Sync button on the Arlo base station for too long, the LED under the USB symbol blinks amber for 10 minutes.
Why is my Arlo camera not syncing with base station?
Check the battery status Low batteries can prevent your camera from syncing to the base station. If the battery is low, the battery icon is orange. To check if your camera’s battery status: Launch the Arlo app or log in to your account at my.arlo.com.
How do I sync my Arlo camera?
Press the Sync button on top of the camera for about two seconds and then release the button. Note: Cameras must be synced one at a time. A blue LED on the camera blinks rapidly to confirm sync. If the LED on the camera blinks amber, the sync is not successful.
How do I get my Arlo camera back online?
Log out of the Arlo app on your mobile device or web browser and log back in again. If your camera still appears offline in the Arlo app, visit Arlo Support to speak with an expert. The LED blinks blue and purple. The camera is connecting to the network and the cloud.
How do you sync Arlo home base?
Press the Sync button on top of the camera for about two seconds and then release the button. The LED blinks amber if the sync is not successful. You must repeat the sync process.
How do I connect Arlo to base station?
Exact steps are provided below.
- Launch the Arlo app on iOS or Android.
- Tap or click Settings > My Devices.
- Select your Arlo camera.
- Scroll to the bottom of the Device Settings screen, and tap or click Remove Device.
- From the Devices screen, tap or click Add New Device, and select your camera from the list.
Why will my Arlo not sync?
Sounds like a reset is in order. Remove all devices in Settings, My Devices and reinsert all batteries to reset the cameras. Add the base using the Add Device button in the Devices tab and sync the cameras. Be sure to press the base sync button briefly – don’t hold it.
Can you use Arlo camera without base?
You need a base station to connect Arlo Wire-Free and Arlo Pro Wire-Free cameras. You don’t need a base station to connect Arlo Q and Arlo Q Plus cameras. They connect directly to your Wi-Fi router.
Does Arlo base station need to be connected to router?
Each base station must be connected to your router using an Ethernet cable. Note: You can also connect an Arlo or Arlo Pro base station to a WiFi extender if the extender has an available Ethernet port.
How can I get my Arlo base station back online remotely?
You can RESTART the base remotely by setting>devives>arlo base>restart. If the base was off line due to internet out, it may come back. But it may not if the problem is before it in the modem/router.
Can I connect my Arlo base wirelessly?
No wireless option. The base needs to be connected by Ethernet cable to the router. No wireless option.
How do you connect Arlo base to app?
open arlo app, add device, “select your arlo device”, “arlo camera wire-free”, ” plug an Ethernet cable into your arlo base station or hub” continue, “power your arlo base station or hub” continue, “discovering your device.
How do I connect my Arlo base station to WiFi extender?
Connect the Arlo base station to the WiFi range extender or powerline adapter using an Ethernet cable. Turn the base station on by pressing the On-Off button. The Power LED and Internet LED on the front of the base station illuminate green in approximately two minutes. Set up and sync your Arlo cameras.