FAQ: How To Connect Arlo Camera?

To connect your Arlo camera to your 2.4GHz WiFi Router:

  1. Launch the Arlo app on iOS or Android.
  2. Tap or click Settings My Devices.
  3. Select your Arlo camera.
  4. Scroll to the bottom of the Device Settings screen, and tap or click Remove Device.
  5. From the Devices screen, tap or click Add New Device, and select your camera.

Why is my Arlo not connecting?

Make sure that your router is powered on. If the Internet LED lights solid amber, your base station is connected to your router, but is unable to connect to the Arlo cloud server. If the Internet LED lights green, perform a factory reset on your base station and try the installation process again.

How do I get my Arlo camera back online?

Log out of the Arlo app on your mobile device or web browser and log back in again. If your camera still appears offline in the Arlo app, visit Arlo Support to speak with an expert. The LED blinks blue and purple. The camera is connecting to the network and the cloud.

How do I manually pair my Arlo device?

To manually sync Arlo Ultra, Pro 3, or Pro 4

  1. Release the Arlo camera from the camera housing.
  2. Pull the camera out of the camera housing.
  3. Press the Sync button underneath your camera.
  4. Wait for your Arlo camera and SmartHub to sync.
  5. Check your Arlo camera’s live stream in the Arlo app to verify that the camera was synced.

How do I connect my Arlo camera to a different WiFi?

To connect your Arlo Bridge to a different WiFi network:

  1. Launch the Arlo app or log in to your Arlo account at my.arlo.com.
  2. Tap or click Settings.
  3. On the My Devices page, tap or click your Arlo Bridge.
  4. Under NETWORK, tap or click Wi-Fi.
  5. Tap or click Change Network.
  6. Follow the onscreen instructions.
You might be interested:  Readers ask: What Does Dslr Stand For Camera?

How do I reconnect my Arlo camera?

Wait for the sync status LED to blink green. Press the Sync button on top of the camera for about two seconds and then release the button. A blue LED on the camera blinks rapidly to confirm sync. If the LED on the camera blinks amber, the sync is not successful.

What do you do when your Arlo camera wont connect?

Make sure that the camera LED is blinking blue while the camera is being discovered. (The Arlo Video Doorbell LED ring blinks white.) The camera LED can time out if it blinks longer than two minutes without successfully connecting to your WiFi network. If the camera times out, press the sync button again.

How do I reconnect my Arlo base station to the Internet?

Turn the base station on by pressing the On-Off button. Wait for the power LED and Internet LED on the front of the base station to turn green in about two minutes. If you’re using a single-LED base station, wait for the LED to turn blue. Your base station is connected to the Internet.

How do I know if my Arlo camera is on?

There is no indication the camera is on to a person looking at it exception is in dark if the night vision is enabled, then the IR LEDs glow a faint red.

What does it mean when Arlo is offline?

If you see an error message, such as Base Station Offline, instead of the video feed, your base station is not connected to the Internet.

You might be interested:  FAQ: How To Use Camera On Mac?

How do I connect my Arlo camera to my phone?

To set up Arlo Q on an Android device:

  1. Launch the Arlo app or log in to your Arlo account at my.arlo.com.
  2. Tap the + icon or click Add Device.
  3. Tap or click Arlo Q.
  4. Select your connection type.
  5. Plug in your Arlo Q.
  6. Ensure that your router name (network SSID) appears under Network Name.

How do you resync Arlo lights?

If your light still does not sync after trying these steps, try power cycling the light:

  1. Disconnect your Arlo Security Light’s AC adapter and remove the battery.
  2. Wait at least 20 seconds.
  3. Plug the light back in or reinsert the battery.
  4. Attempt to sync the light again.

What does it mean when Arlo camera blinks blue?

The camera is syncing with the base station. Fast blinking blue. The camera has synced with the base station.

How do I connect my Arlo camera without a base station?

From the Devices screen, tap or click Add New Device, and select your camera. If Arlo detects a SmartHub or base station, tap or click Connect without SmartHub or Connect without a Base Station. Follow the in-app instructions to connect your camera or doorbell directly to a 2.4 GHz WiFi network.

Can I connect my Arlo base wirelessly?

No wireless option. The base needs to be connected by Ethernet cable to the router. No wireless option.

Which Arlo cameras connect directly to WiFi?

Arlo launches latest Pro 4 camera – direct to WiFi option

  • With the direct to WiFi option, users can purchase the high quality Pro 4 camera, without the need for an Arlo SmartHub base station.
  • Brad Little from Arlo says “Our industry-leading products are designed to deliver peace of mind without compromise.

Leave a Reply

Your email address will not be published. Required fields are marked *